S. Gheduzzi and A. W. Miles, A review of pre-clinical testing of femoral stem subsidence and comparison with clinical data, Proc Inst Mech Eng H, vol.221, issue.1, pp.39-46, 2007.

M. Jasty, In vivo skeletal responses to porous-surfaced implants subjected to small induced motions, J Bone Joint Surg Am, vol.79, issue.5, pp.707-721, 1997.

D. J. Berry, Epidemiology: hip and knee, Orthop Clin North Am, vol.30, issue.2, pp.183-90, 1999.

J. J. Elias, Medial cortex strain distribution during noncemented total hip arthroplasty, Clin Orthop Relat Res, issue.370, pp.250-258, 2000.

A. Moroni, Risk factors for intraoperative femoral fractures during total hip replacement, Ann Chir Gynaecol, vol.89, issue.2, pp.113-121, 2000.

J. T. Schwartz, J. G. Jr, C. A. Mayer, and . Engh, Femoral fracture during non-cemented total hip arthroplasty, J Bone Joint Surg Am, vol.71, issue.8, pp.1135-1177, 1989.

T. Lena,

, Acta Chir Orthop Traumatol Cech, vol.80, issue.5, pp.341-346, 2013.

M. Gracia-ochoa, Analysis of 34 cases and a review of Spanish series in the last 20 years, Rev Esp Cir Ortop Traumatol, vol.60, issue.5, pp.271-279, 2016.

M. H. Vioreanu, Field testing the Unified Classification System for peri-prosthetic fractures of the pelvis and femur around a total hip replacement : an international collaboration, Bone Joint J, issue.11, pp.1472-1479, 2014.

M. Lindberg-larsen, Increased risk of intraoperative and early postoperative periprosthetic femoral fracture with uncemented stems, Acta Orthop, vol.88, issue.4, pp.390-394, 2017.

G. Whitwell, Spectral analysis of the sound produced during femoral broaching and implant insertion in uncemented total hip arthroplasty, Proc Inst Mech Eng H, vol.227, issue.2, pp.175-80, 2013.

M. Baleani, L. Cristofolini, and A. Toni, Initial stability of a new hybrid fixation hip stem: experimental measurement of implant-bone micromotion under torsional load in comparison with cemented and cementless stems, J Biomed Mater Res, vol.50, issue.4, pp.605-620, 2000.

L. Cristofolini, E. Varini, and M. Viceconti, In-vitro method for assessing femoral implant-bone micromotions in resurfacing hip implants under different loading conditions, Proc Inst Mech Eng H, vol.221, issue.8, pp.943-50, 2007.

R. Bieger, Primary stability and strain distribution of cementless hip stems as a function of implant design, Clin Biomech, vol.27, issue.2, pp.158-64, 2012.

R. Bieger, Biomechanics of a short stem: In vitro primary stability and stress shielding of a conservative cementless hip stem, J Orthop Res, vol.31, issue.8, pp.1180-1186, 2013.

F. Schmidutz, Influence of different sizes of composite femora on the biomechanical behavior of cementless hip prosthesis, Clin Biomech, vol.41, pp.60-65, 2017.

M. Gortchacow, Simultaneous and multisite measure of micromotion, subsidence and gap to evaluate femoral stem stability, J Biomech, vol.45, issue.7, pp.1232-1240, 2012.

M. Gortchacow, A new technique to measure micromotion distribution around a cementless femoral stem, J Biomech, vol.44, issue.3, pp.557-60, 2011.

V. Malfroy-camine, Effect of a collar on subsidence and local micromotion of cementless femoral stems: in vitro comparative study based on micro-computerised tomography, Int Orthop, 2017.

K. Denis, Vibration analysis of the biomechanical stability of total hip replacements, pp.313-328, 2017.

L. C. Pastrav, In vivo evaluation of a vibration analysis technique for the per-operative monitoring of the fixation of hip prostheses, J Orthop Surg Res, vol.4, p.10, 2009.

L. C. Pastrav, Detection of the insertion end point of cementless hip prostheses using the comparison between successive frequency response functions, J Appl Biomater Biomech, vol.6, issue.1, pp.23-32, 2008.

V. Mathieu, Variation of the impact duration during the in vitro insertion of acetabular cup implants, Med Eng Phys, vol.35, issue.11, pp.1558-63, 2013.

A. Michel, Monitoring the press-fit insertion of an acetabular cup by impact measurements: Influence of bone abrasion, Proc Inst Mech Eng H, vol.228, issue.10, pp.1027-1061, 2014.

A. Michel, In vitro evaluation of the acetabular cup primary stability by impact analysis, J Biomech Eng, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01166711

A. Michel, Ex vivo estimation of cementless acetabular cup stability using an impact hammer, Med Eng Phys, vol.38, issue.2, pp.80-86, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01343516

V. H. Nguyen, Influence of anisotropic bone properties on the biomechanical behavior of the acetabular cup implant: a multiscale finite element study, Comput Methods Biomech Biomed Engin, pp.1-14, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01786536

M. L. Raffa, Dependence of the primary stability of acetabular cup implants on its biomechanical environment, Biomechanics and Modeling in Mechanobiology

A. Michel, Finite element model of the impaction of a press-fitted acetabular cup, Med Biol Eng Comput, vol.55, issue.5, pp.781-791, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01785967

A. Michel, Assessing the Acetabular Cup Implant Primary Stability by Impact Analyses: A Cadaveric Study, PLoS One, vol.11, issue.11, p.166778, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01546759

R. Bosc, Influence of soft tissue in the assessment of the primary fixation of acetabular cup implants using impact analyses, Clin Biomech, vol.55, pp.7-13, 2018.

A. Fottner, Biomechanical evaluation of different offset versions of a cementless hip prosthesis by 3-dimensional measurement of micromotions, Clin Biomech, vol.26, issue.8, pp.830-835, 2011.

L. Cristofolini, Mechanical validation of whole bone composite femur models, J Biomech, vol.29, issue.4, pp.525-560, 1996.