F. Gitzhofer, E. Bouyer, and M. I. Boulos, Suspension Plasma Spraying, U.S. Patents, vol.5, pp.609-921, 1997.

J. J. Karthikeyan, C. C. Berndt, J. Tikkanen, S. Reddy, and H. Herman, Plasma spray synthesis of nanomaterial powders and deposits, Materials Science and Engineering: A, vol.238, issue.2, pp.275-286, 1997.
DOI : 10.1016/S0921-5093(96)10568-2

J. J. Karthikeyan, C. C. Berndt, S. Reddy, J. Y. Wang, A. H. King et al., Nanomaterial Deposits Formed by DC Plasma Spraying of Liquid Feedstocks, Journal of the American Ceramic Society, vol.4, issue.1, pp.121-128, 1998.
DOI : 10.1111/j.1151-2916.1998.tb02303.x

URL : http://eng1.jcu.edu.au/Staff/Profiles/chris-berndt/Berndt/Papers/1998%20KARTHIKEYAN%20Nanomaterial%20deposits%20C%26R.pdf

E. Bouyer, F. Gitzhofer, and M. Boulos, Parametric Study of Suspension Plasma Sprayed Hydroxyapatite, Proceedings of the ITSC, pp.683-691, 1996.

E. Dongmo, R. Gadow, A. Killinger, and M. Wenzelburger, Modeling of Combustion as well as Heat, Mass, and Momentum Transfer During Thermal Spraying by HVOF and HVSFS, Journal of Thermal Spray Technology, vol.23, issue.18, pp.896-908, 2009.
DOI : 10.1002/9780470754085

M. Fauchais and G. , Latest Developments in Suspension and Liquid Precursor Thermal Spraying, Journal of Thermal Spray Technology, vol.54, issue.18, pp.226-239, 2010.
DOI : 10.1016/j.surfcoat.2008.01.017

URL : https://hal.archives-ouvertes.fr/hal-00451592

P. Fauchais and A. Vardelle, Plasma spraying: Present and future, Pure and Applied Chemistry, vol.66, issue.6, pp.1247-1258, 1994.
DOI : 10.1351/pac199466061247

URL : http://old.iupac.org/publications/pac/1994/pdf/6606x1247.pdf

K. Wittmann-ténèze, Etude de l'élaboration de couches minces par Open Journal of Fluid Dynamics projection plasma, 2001.

B. M. Cetegen and M. Basu, Review of Modeling of Liquid Precursor Droplets and Particles Injected into Plasmas and High-Velocity Oxy-Fuel (HVOF) Flame Jets for Thermal Spray Deposition Applications, Journal of Thermal Spray Technology, vol.163, issue.164, pp.769-793, 2009.
DOI : 10.1017/CBO9780511529566

A. Killinger, R. Gadow, G. Mauer, A. Guignard, R. Vaßen et al., Review of New Developments in Suspension and Solution Precursor Thermal Spray Processes, Journal of Thermal Spray Technology, vol.205, issue.2, pp.677-695, 2011.
DOI : 10.1016/j.surfcoat.2010.07.015

E. Dongmo, M. Wenzelburger, and R. Gadow, Analysis and optimization of the HVOF process by combined experimental and numerical approaches, Surface and Coatings Technology, vol.202, issue.18, pp.4470-4478, 2008.
DOI : 10.1016/j.surfcoat.2008.04.029

J. R. Fincke, D. M. Crawford, S. C. Snyder, W. D. Swank, D. C. Haggard et al., High-Velocity, High-Temperature Plasma Jets, 2003.

, Part I: Experimental Results, pp.4201-4213

Z. Duan and J. Heberlein, Arc Instabilities in a Plasma Spray Torch, Journal of Thermal Spray Technology, vol.11, issue.1, pp.44-57, 2002.
DOI : 10.1361/105996302770348961

J. F. Coudert, M. P. Planche, and P. Fauchais, Velocity measurement of dc plasma jets based on arc root fluctuations, Plasma Chemistry and Plasma Processing, vol.15, issue.1, pp.47-70, 1995.
DOI : 10.1299/jsme1958.18.707

E. Meillot, S. Vincent, C. Caruyer, J. Caltagirone, and D. Damiani, From DC Time-Dependent Thermal Plasma Generation to Suspension Plasma-Spraying Interactions, Journal of Thermal Spray Technology, vol.14, issue.3, pp.875-886, 2009.
DOI : 10.1361/105996398770350729

C. Caruyer, S. Vincent, E. Meillot, J. Caltagirone, and D. Damiani, Analysis of the unsteadiness of a plasma jet and the related turbulence, Surface and Coatings Technology, vol.205, issue.4, pp.1165-1170, 2010.
DOI : 10.1016/j.surfcoat.2010.07.025

P. Fauchais, R. Etchart-salas, C. Delbos, M. Tognonvi, V. Rat et al., Suspension and solution plasma spraying of finely structured layers: potential application to SOFCs, Journal of Physics D: Applied Physics, vol.40, issue.8, pp.2394-24060022, 2007.
DOI : 10.1088/0022-3727/40/8/S19

URL : https://hal.archives-ouvertes.fr/hal-00145742

C. Caruyer, S. Vincent, E. Meillot, D. Damiani, and J. Caltagirone, Effects of Plasma Conditions on the Fragmentation and the Atomization of a Liquid Jet, Proceedings of the 24th European Conference on Liquid Atomization and Spray Systems ILASS, 2011.

L. Rayleigh, On the Capillary Phenomena of Jets, Proceedings of the Royal Society of London, vol.29, issue.196-199, pp.71-97, 1879.
DOI : 10.1098/rspl.1879.0015

M. Pilch and C. A. Erdman, Use of breakup time data and velocity history data to predict the maximum size of stable fragments for acceleration-induced breakup of a liquid drop, International Journal of Multiphase Flow, vol.13, issue.6, pp.741-7570301, 1987.
DOI : 10.1016/0301-9322(87)90063-2

W. Ranz and W. Marshall, Evaporation from Drops, Chemical Engineering Progress, vol.48, pp.141-146, 1952.

X. Chen, Particle heating in a thermal plasma, Pure and Applied Chemistry, vol.60, issue.5, pp.651-662, 1988.
DOI : 10.1351/pac198860050651

P. J. O-'rourke and A. A. Amsden, The Tab Method for Numerical Calculation of Spray Droplet Breakup, 1987.

G. Mariaux and A. Vardelle, 3-D time-dependent modelling of the plasma spray process. Part 1: flow modelling, International Journal of Thermal Sciences, vol.44, issue.4, pp.357-366, 2005.
DOI : 10.1016/j.ijthermalsci.2004.07.006

W. A. Sirignano, Fluid Dynamics and Transport of Droplets and Sprays, 1999.

Y. Shan, T. W. Coyle, and J. Mostaghimi, Numerical Simulation of Droplet Breakup and Collision in the Solution Precursor Plasma Spraying, Journal of Thermal Spray Technology, vol.5, issue.5, pp.698-704, 2007.
DOI : 10.1007/s11666-007-9102-z

A. Ozturk and B. M. Cetegen, Modeling of axially and transversely injected precursor droplets into a plasma environment, International Journal of Heat and Mass Transfer, vol.48, issue.21-22, pp.4367-4383, 2005.
DOI : 10.1016/j.ijheatmasstransfer.2005.05.015

A. B. Murphy, Transport Coefficient of Air, Argon-Air, Nitrogen-Air and Oxygen-Air Plasmas. Plasma Chemistry Plasma Process, pp.279-307, 1994.

M. I. Boulos, P. Fauchais, and E. Pfender, Thermal Plasma, Fundamental and Application, vol.1, 1994.
DOI : 10.1007/978-1-4899-1337-1

URL : https://hal.archives-ouvertes.fr/hal-00368505

B. Selvan, K. Ramachandran, B. C. Pillai, and D. Subhakar, Numerical Modelling of Ar-N2 Plasma Jet Impinging on a Flat Substrate, Journal of Thermal Spray Technology, vol.18, issue.3, pp.534-548, 2001.
DOI : 10.1007/s11666-009-9343-0

B. Selvan, K. Ramachandran, K. Sreekumar, T. K. Thiyagarajan, and P. V. Ananthapadmanabhan, Numerical and experimental studies on DC plasma spray torch, Vacuum, vol.84, issue.4, pp.444-452, 2010.
DOI : 10.1016/j.vacuum.2009.09.009

R. L. Williamson, J. R. Fincke, D. M. Crawford, S. C. Snyder, W. D. Swank et al., Entrainment in high-velocity, high-temperature plasma jets., International Journal of Heat and Mass Transfer, vol.46, issue.22, pp.4215-4228, 2003.
DOI : 10.1016/S0017-9310(03)00271-0

H. Xiong and J. Lin, Nanoparticles Modeling in Axially Injection Suspension Plasma Spray of Zirconia and Alumina Ceramics, Journal of Thermal Spray Technology, vol.28, issue.1, pp.887-895, 2009.
DOI : 10.1007/s11666-007-9112-x

S. Vincent, G. Balmigère, C. Caruyer, E. Meillot, and J. Caltagirone, Contribution to the modeling of the interaction between a plasma flow and a liquid jet, Surface and Coatings Technology, vol.203, issue.15, pp.2162-2171, 2009.
DOI : 10.1016/j.surfcoat.2008.11.009

S. Janisson, E. Meillot, A. Vardelle, J. F. Coudert, B. Pateyron et al., Plasma Spraying Using Ar-He-H<SUB>2</SUB> Gas Mixtures, Journal of Thermal Spray Technology, vol.8, issue.4, pp.545-552, 1999.
DOI : 10.1361/105996399770350232

C. Marchand, C. Chazelas, G. Mariaux, and A. Vardelle, Liquid Precursor Plasma Spraying: Modeling the Interactions Between the Transient Plasma Jet and the Droplets, Journal of Thermal Spray Technology, vol.44, issue.1, pp.705-712, 2007.
DOI : 10.1007/978-1-4899-1337-1

URL : https://hal.archives-ouvertes.fr/hal-00282847

R. L. Williamson, J. R. Fincke, and C. H. Chang, A Computational Examination of the Sources of Statistical Variances in Particle Parameters during Thermal Open Journal of Fluid Dynamics Plasma Spraying. Plasma Chemistry Plasma Process, pp.299-3241007088110319, 2000.

C. Kai, X. Chen, and W. X. Pan, Comparison of Laminar and Turbulent Thermal Plasma Jet Characteristics. A Modeling Study, Plasma Chemistry Plasma Process, vol.26, pp.211-235, 2006.

J. Trelles, C. Chazelas, A. Vardelle, and J. V. Heberlein, Arc Plasma Torch Modeling, Journal of Thermal Spray Technology, vol.38, issue.2, pp.728-752, 2009.
DOI : 10.1023/A:1023272007864

URL : https://hal.archives-ouvertes.fr/hal-00450921

E. Moreau, C. Chazelas, G. Mariaux, and A. Vardelle, Modeling the Restrike Mode Operation of a DC Plasma Spray Torch, Journal of Thermal Spray Technology, vol.15, issue.4, pp.524-530, 2006.
DOI : 10.1361/105996306X147306

URL : https://hal.archives-ouvertes.fr/hal-00131182