J. T. Hsu, C. H. Chang, H. L. Huang, M. E. Zobitz, W. P. Chen et al., The number of screws, bone quality, and friction coefficient affect acetabular cup stabilityInitial stability of press-fit acetabular components under rotational forcesPostmortem analysis of bone growth into porous-coated acetabular components, Med Eng Phys J Arthroplasty J Bone Joint Surg Am, vol.295, issue.79, pp.1089-95, 1997.

G. Haiat, H. L. Wang, J. A. Brunski-]-l, A. Mueller, T. Kress et al., Effects of biomechanical properties of the bone-implant interface on dental implant stability: from in silico approaches to the patient's mouthPeriacetabular bone changes after uncemented total hip arthroplasty evaluated by quantitative computed tomographyModes of periacetabular load transfer to cortical and cancellous bone after cemented versus uncemented total hip arthroplasty: a prospective study using computed tomography-assisted osteodensitometry, Annu Rev Biomed Eng Acta Orthop J Orthop Res, vol.168, issue.27, pp.187-213, 2006.

V. Mathieu, R. Vayron, G. Richard, G. Lambert, S. Naili et al., Biomechanical determinants of the stability of dental implants: Influence of the bone???implant interface properties, Journal of Biomechanics, vol.47, issue.1, pp.3-13, 2014.
DOI : 10.1016/j.jbiomech.2013.09.021
URL : https://hal.archives-ouvertes.fr/hal-01082370

K. Chiba, M. Ito, M. Osaki, M. Uetani, and H. Shindo, In vivo structural analysis of subchondral trabecular bone in osteoarthritis of the hip using multi-detector row CT, Osteoarthritis and Cartilage, vol.19, issue.2, pp.180-185, 2011.
DOI : 10.1016/j.joca.2010.11.002

D. Ruffoni, A. J. Wirth, J. A. Steiner, I. H. Parkinson, R. Muller et al., The different contributions of cortical and trabecular bone to implant anchorage in a human vertebra, Bone, vol.50, issue.3, pp.733-741, 2012.
DOI : 10.1016/j.bone.2011.11.027

]. S. Matsunaga, Y. Shirakura, T. Ohashi, K. Nakahara, Y. Tamatsu et al., Biomechanical role of peri-implant cancellous bone architecture, Int J Prosthodont, vol.23, issue.11, pp.333-341, 2010.

T. Ohashi, S. Matsunaga, K. Nakahara, S. Abe, Y. Ide et al., Biomechanical role of peri-implant trabecular structures during vertical loading, Clinical Oral Investigations, vol.6, issue.5, pp.507-520, 2010.
DOI : 10.2320/materia.46.456

S. E. Basler, J. Traxler, R. Muller, and G. H. Van-lenthe, Peri-implant bone microstructure determines dynamic implant cut-out, Medical Engineering & Physics, vol.35, issue.10, pp.1442-1451, 2013.
DOI : 10.1016/j.medengphy.2013.03.016

]. W. Ma, X. Zhang, J. Wang, Q. Zhang, W. Chen et al., Optimized design for a novel acetabular component with three wings. A study of finite element analysis, Journal of Surgical Research, vol.179, issue.1, pp.78-86, 2013.
DOI : 10.1016/j.jss.2012.08.036

A. T. Phillips, A. S. Pankaj, C. R. Usmani, and . Howie, The effect of acetabular cup size on the short-term stability of revision hip arthroplasty: A finite element investigation, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol.335, issue.3, pp.239-288, 2004.
DOI : 10.1007/s004029900122

D. Janssen, R. E. Zwartele, H. C. Doets, and N. Verdonschot, Computational assessment of pressfit acetabular implant fixation: the effect of implant design, interference fit, bone quality, and frictional properties, Proc Inst Mech Eng H, vol.22417, pp.67-75, 2010.

P. Goebel, D. Kluess, J. Wieding, R. Souffrant, H. Heyer et al., The influence of head diameter and wall thickness on deformations of metallic acetabular press-fit cups and UHMWPE liners: a finite element analysis, Journal of Orthopaedic Science, vol.18, issue.2, pp.264-70, 2013.
DOI : 10.1007/s00776-012-0340-7

]. R. Ghosh, K. Mukherjee, S. Gupta, S. D. Cook, K. A. Walsh et al., Bone remodelling around uncemented metallic and ceramic acetabular componentsInterface mechanics and bone growth into porous Co-Cr-Mo alloy implants, Proc Inst Mech Eng H Clin Orthop Relat Res, vol.227, pp.490-502, 1985.
DOI : 10.1177/0954411913478703

H. S. Hothi, J. J. Busfield, and J. C. Shelton, Explicit finite element modelling of the impaction of metal press-fit acetabular componentsDeformation of press-fitted metallic resurfacing cups. Part 2: Finite element simulation, Proc Inst Mech Eng H Proc Inst Mech Eng H, vol.225, issue.220, pp.303-317, 2006.

V. Mathieu, A. Michel, C. H. Flouzat-lachaniette, A. Poignard, P. Hernigou et al., Variation of the impact duration during the in vitro insertion of acetabular cup implants, Medical Engineering & Physics, vol.35, issue.11, pp.1558-63, 2013.
DOI : 10.1016/j.medengphy.2013.04.005

]. A. Michel, R. Bosc, V. Mathieu, P. Hernigou, and G. Haiat, Monitoring the press-fit insertion of an acetabular cup by impact measurements: Influence of bone abrasion, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol.266, issue.10, pp.1027-1061, 2014.
DOI : 10.1016/0142-9612(93)90051-3

]. A. Michel, R. Bosc, F. Sailhan, R. Vayron, and G. Haiat, Ex vivo estimation of cementless acetabular cup stability using an impact hammer, Medical Engineering & Physics, vol.38, issue.2, 2015.
DOI : 10.1016/j.medengphy.2015.10.006
URL : https://hal.archives-ouvertes.fr/hal-01343516

]. A. Michel, R. Bosc, R. Vayron, and G. Haiat, In Vitro Evaluation of the Acetabular Cup Primary Stability by Impact Analysis, Journal of Biomechanical Engineering, vol.137, issue.3, 2015.
DOI : 10.1115/1.4029505
URL : https://hal.archives-ouvertes.fr/hal-01166711

]. S. Guipieri, Y. Nagatani, R. Bosc, V. H. Nguyen, C. Chappard et al., Ultrasound Speed of Sound Measurements in Trabecular Bone Using the Echographic Response of a Metallic Pin, Ultrasound in Medicine & Biology, vol.41, issue.11, pp.2966-76, 2015.
DOI : 10.1016/j.ultrasmedbio.2015.07.003
URL : https://hal.archives-ouvertes.fr/hal-01343463

S. J. Hollister and N. Kikuchi, Homogenization theory and digital imaging: A basis for studying the mechanics and design principles of bone tissue, Biotechnology and Bioengineering, vol.36, issue.7, pp.586-96, 1994.
DOI : 10.1007/BF02406136

J. M. Guedes and N. Kikuchi, Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite element method Some methods in the mathematical analysis of systems and their control, Comput Methods Appl Mech Eng J. L. Lions, vol.8329, pp.143-198, 1981.

]. R. Hart, Bone Modeling and Remodeling, Bone Mechanics Handbook, 2001.
DOI : 10.1201/b14263-37

M. Tsukino, N. Takano, A. Michel, G. Haïat, A. Michel et al., Multiscale stress analysis of trabecular bone around acetabular cup implant by finite element mesh superposition methodFinite element model of the impaction of a press-fitted acetabular cup, JSME MELMechanical Engineering Letters) Med Biol Eng Comput, vol.1, pp.15-00354, 2015.

Z. M. Lin, S. Meakins, M. M. Morlock, P. Parsons, C. Hardaker et al., Deformation of press-fitted metallic resurfacing cups. Part 1: Experimental simulation, Proc Inst Mech Eng H, vol.220, pp.299-309, 2006.

]. R. Ghosh, S. Gupta, A. Dickinson, and M. Browne, Experimental Validation of Finite Element Models of Intact and Implanted Composite Hemipelvises Using Digital Image Correlation, Journal of Biomechanical Engineering, vol.60, issue.8, p.81003, 2012.
DOI : 10.1016/j.clinbiomech.2009.02.007

]. B. Van-rietbergen, Micro-FE Analyses of Bone: State of the Art, Adv Exp Med Biol, vol.496, pp.21-30, 2001.
DOI : 10.1007/978-1-4615-0651-5_3

V. Sansalone, S. Naili, V. Bousson, C. Bergot, F. Peyrin et al., Determination of the heterogeneous anisotropic elastic properties of human femoral bone: From nanoscopic to organ scale, Journal of Biomechanics, vol.43, issue.10, pp.1857-63, 2010.
DOI : 10.1016/j.jbiomech.2010.03.034
URL : https://hal.archives-ouvertes.fr/hal-00692863

]. V. Sansalone, V. Bousson, S. Naili, C. Bergot, F. Peyrin et al., Anatomical distribution of the degree of mineralization of bone tissue in human femoral neck: Impact on biomechanical properties, Bone, vol.50, issue.4, pp.876-84, 2012.
DOI : 10.1016/j.bone.2011.12.020
URL : https://hal.archives-ouvertes.fr/hal-00692613

C. Hellmich, C. Kober, and B. Erdmann, Micromechanics-Based Conversion of CT Data into Anisotropic Elasticity Tensors, Applied to FE Simulations of a Mandible, Annals of Biomedical Engineering, vol.128, issue.8, pp.108-130, 2008.
DOI : 10.1007/978-3-7091-2662-2_6

Z. Yosibash, N. Trabelsi, C. R. Hellmich, M. Spears, E. Pfleiderer et al., Subject-Specific p-FE Analysis of the Proximal Femur Utilizing Micromechanics-Based Material Properties International Journal for Multiscale [41] IInterfacial conditions between a press-fit acetabular cup and bone during daily activities: implications for achieving bone in-growth, J Biomech, vol.33, pp.1471-1478, 2000.

C. Voigt, C. Klohn, R. Bader, G. Von-salis-soglio, and R. Scholz, Finite element analysis of shear stresses at the implant-bone interface of an acetabular press-fit cup during impingement / Finite-Elemente-Berechnung der Schubspannungen im Implantat-Knochen-Interface einer acetabul??ren Press-Fit-Pfanne bei Impingement, Biomedizinische Technik/Biomedical Engineering, vol.75, issue.2, pp.208-223, 2007.
DOI : 10.1016/S0021-9290(00)00112-3

M. J. Curtis, R. H. Jinnah, V. D. Wilson, and D. S. Hungerford, The initial stability of uncemented acetabular components, The Journal of Bone and Joint Surgery. British volume, vol.74, issue.3, pp.372-376, 1992.
DOI : 10.1302/0301-620X.74B3.1587880

P. G. Perona, J. Lawrence, W. G. Paprosky, A. G. Patwardhan, and M. Sartori, Acetabular micromotion as a measure of initial implant stability in primary hip arthroplasty, The Journal of Arthroplasty, vol.7, issue.4, pp.537-584, 1992.
DOI : 10.1016/S0883-5403(06)80076-8

G. Bergmann, G. Deuretzbacher, M. Heller, F. Graichen, A. Rohlmann et al., Hip contact forces and gait patterns from routine activities, Journal of Biomechanics, vol.34, issue.7, pp.859-71, 2001.
DOI : 10.1016/S0021-9290(01)00040-9

G. Haiat, F. Padilla, M. Svrcekova, Y. Chevalier, D. Pahr et al., Relationship between ultrasonic parameters and apparent trabecular bone elastic modulus: A numerical approach, Journal of Biomechanics, vol.42, issue.13, pp.2033-2042, 2009.
DOI : 10.1016/j.jbiomech.2009.06.008

P. Augat, T. Link, T. F. Lang, J. C. Lin, S. Majumdar et al., Anisotropy of the elastic modulus of trabecular bone specimens from different anatomical locations, Medical Engineering & Physics, vol.20, issue.2, pp.124-155, 1998.
DOI : 10.1016/S1350-4533(98)00001-0

J. P. Van-den-bergh, G. H. Van-lenthe, A. R. Hermus, F. H. Corstens, A. G. Smals et al., Speed of sound reflects Young???s modulus as assessed by microstructural finite element analysis, Bone, vol.26, issue.5, pp.519-543, 2000.
DOI : 10.1016/S8756-3282(00)00249-0

R. W. Goulet, S. A. Goldstein, M. J. Ciarelli, J. L. Kuhn, M. B. Brown et al., The relationship between the structural and orthogonal compressive properties of trabecular bone, Journal of Biomechanics, vol.27, issue.4, pp.375-389, 1994.
DOI : 10.1016/0021-9290(94)90014-0

R. Hodsgkinson, J. D. Currey51-]-f, S. M. Hou, S. J. Lang, D. A. Hoshaw et al., Seperate effects of osteoporosis and density on the strength and stiffness of human cancellous boneHuman vertebral body apparent and hard tissue stiffnessPeriacetabular stress distributions after joint replacement with subchondral bone retention, Clin. Biomech J. Biomech. Acta Orthop Scand, vol.85253, issue.54, pp.262-268, 1983.

C. Zietz, A. Fritsche, D. Kluess, W. Mittelmeier, and R. Bader, Influence of acetabular cup design on the primary implant stability, Der Orthop??de, vol.26, issue.11, pp.1097-105, 2009.
DOI : 10.1243/0954411991534780

I. R. Spears, M. M. Morlock, M. Pfleiderer, E. Schneider, and E. Hille, The influence of friction and interference on the seating of a hemispherical press-fit cup: a finite element investigation, Journal of Biomechanics, vol.32, issue.11, pp.1183-1192, 1999.
DOI : 10.1016/S0021-9290(99)00121-9

K. L. Ong, J. Lehman, W. I. Notz, T. J. Santner, D. L. Bartel et al., Acetabular cup geometry and bone-implant interference have more influence on initial periprosthetic joint space than joint loading and surgical cup insertionThe effect of interfacial parameters on cup-bone relative micromotions. A finite element investigation, J Biomech Eng J Biomech, vol.128, issue.34, pp.169-75, 2001.

J. R. Mackenzie, J. J. Callaghan, D. R. Pedersen, and T. D. Brown, Areas of Contact and Extent of Gaps With Implantation of Oversized Acetabular Components in Total Hip Arthroplasty, Clinical Orthopaedics and Related Research, vol.&NA;, issue.298, pp.127-163, 1994.
DOI : 10.1097/00003086-199401000-00018

]. S. Nakasone, M. Takao, T. Nishii, T. Sakai, N. Sugano et al., Birmingham Hip Resurfacing cupsPreprocessing and postprocessing for materials based on the homogenization method with adaptive finite element methodStructural strength prediction for porous titanium based on micro-stress concentration by micro-CT image-based multiscale simulationMicrostructure-based stress analysis and evaluation for porous ceramics by homogenization method with digital image-based modelingMicrostructure-based deep-drawing simulation of knitted fabric reinforced thermoplastics by homogenization theoryMacro/micro simultaneous validation for multiscale analysis of semi-periodically perforated plate using full-field strain measurement, Numerical study on the morphology and mechanical role of healthy and osteoporotic vertebral trabecular bone, pp.1676-82, 1990.

K. S. Basaruddin, N. Takano, H. Akiyama, and T. Nakano, Uncertainty Modeling in the Prediction of Effective Mechanical Properties Using Stochastic Homogenization Method with Application to Porous Trabecular Bone, MATERIALS TRANSACTIONS, vol.54, issue.8, 2013.
DOI : 10.2320/matertrans.ME201307