D. Whitehead, Effect of mistuning on the vibration of turbo???machine blades induced by wakes, ARCHIVE: Journal of Mechanical Engineering Science 1959-1982 (vols 1-23), vol.8, issue.1, pp.15-21, 1966.
DOI : 10.1243/JMES_JOUR_1966_008_004_02

R. Dye, H. , and T. , Vibration Amplitudes of Compressor Blades Resulting From Scatter in Blade Natural Frequencies, Journal of Engineering for Gas Turbines and Power, vol.91, issue.3, pp.182-187, 1969.
DOI : 10.1115/1.3574726

E. Capiez-lernout and C. Soize, Nonparametric Modeling of Random Uncertainties for Dynamic Response of Mistuned Bladed Disks, Journal of Engineering for Gas Turbines and Power, vol.126, issue.3, pp.610-618, 2004.
DOI : 10.1115/1.1760527

URL : https://hal.archives-ouvertes.fr/hal-00686199

D. Ewins, The effects of detuning upon the forced vibrations of bladed disks, Journal of Sound and Vibration, vol.9, issue.1, pp.65-69, 1969.
DOI : 10.1016/0022-460X(69)90264-8

B. Choi, J. Lentz, A. Rivas-guerra, and M. Mignolet, Optimization of Intentional Mistuning Patterns for the Reduction of the Forced Response Effects of Unintentional Mistuning: Formulation and Assessment, Journal of Engineering for Gas Turbines and Power, vol.125, issue.1, pp.131-140, 2003.
DOI : 10.1115/1.1498270

M. Castanier, G. Ottarson, P. , and C. , A Reduced Order Modeling Technique for Mistuned Bladed Disks, Journal of Vibration and Acoustics, vol.119, issue.3, pp.439-447, 1997.
DOI : 10.1115/1.2889743

M. Castanier, P. , and C. , Using Intentional Mistuning in the Design of Turbomachinery Rotors, AIAA Journal, vol.40, issue.10, pp.2077-2086, 2002.
DOI : 10.2514/2.1542

M. Mignolet, W. Hu, and I. Jadic, On the Forced Response of Harmonically and Partially Mistuned Bladed Disks. Part I: Harmonic Mistuning, International Journal of Rotating Machinery, vol.6, issue.1, pp.29-56, 2000.
DOI : 10.1155/S1023621X0000004X

R. Bladh, M. Castanier, P. , and C. , Reduced Order Modeling and Vibration Analysis of Mistuned Bladed Disk Assemblies With Shrouds, Journal of Engineering for Gas Turbines and Power, vol.121, issue.3, pp.515-522, 1999.
DOI : 10.1115/1.2818503

R. Bladh, M. Castanier, P. , and C. , Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks???Part I: Theoretical Models, Journal of Engineering for Gas Turbines and Power, vol.123, issue.1, pp.89-99, 2001.
DOI : 10.1115/1.1338947

M. Yang, G. , and J. , A Reduced-Order Model of Mistuning Using a Subset of Nominal System Modes, Journal of Engineering for Gas Turbines and Power, vol.123, issue.4, pp.893-900, 2001.
DOI : 10.1115/1.1385197

D. Feiner, G. , and J. , A Fundamental Model of Mistuning for a Single Family of Modes, Journal of Turbomachinery, vol.124, issue.4, pp.597-605, 2002.
DOI : 10.1115/1.1508384

D. Feiner, G. , and J. , Mistuning Identification of Bladed Disks Using a Fundamental Mistuning Model???Part I: Theory, Journal of Turbomachinery, vol.126, issue.1, pp.150-165, 2002.
DOI : 10.1115/1.1643913

S. Lim, M. Castanier, P. , and C. , Vibration Modeling of Bladed Disks Subject to Geometric Mistuning and Design Changes, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, pp.2004-1686, 2004.
DOI : 10.2514/6.2004-1686

C. Martel, R. Corral, and J. Llorens, Stability increase of aerodynamically unstable rotor using intentional mistuning, Proceedings of the ASME TURBO EXPO, 2008.

C. Martel and R. Corral, Asymptotic description of maximum mistuning amplification of bladed disk forced response, Proceedings of the ASME TURBO EXPO, 2008.

A. Sinha, Reduced-Order Model of a Bladed Rotor With Geometric Mistuning, Journal of Turbomachinery, vol.131, issue.3, pp.31007-31008, 2009.
DOI : 10.1115/1.2987237

V. Ganine, M. Legrand, C. Pierre, and H. Michalska, A reduction technique for mistuned bladed disks with superposition of large geometric mistuning and small model uncertainties, Proceedings of the 12-th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01393687

M. Mbaye, C. Soize, and J. Ousty, A Reduced-Order Model of Detuned Cyclic Dynamical Systems With Geometric Modifications Using a Basis of Cyclic Modes, Journal of Engineering for Gas Turbines and Power, vol.132, issue.11, pp.112502-112503, 2010.
DOI : 10.1115/1.4000805

URL : https://hal.archives-ouvertes.fr/hal-00684307

C. Soize, Maximum entropy approach for modeling random uncertainties in transient elastodynamics, The Journal of the Acoustical Society of America, vol.109, issue.5, pp.1979-1996, 2001.
DOI : 10.1121/1.1360716

URL : https://hal.archives-ouvertes.fr/hal-00686287

C. Soize, Random matrix theory for modeling uncertainties in computational mechanics, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.12-16, pp.1333-1366, 2005.
DOI : 10.1016/j.cma.2004.06.038

URL : https://hal.archives-ouvertes.fr/hal-00686187

J. H. Griffin and T. M. Hoosac, Model Development and Statistical Investigation of Turbine Blade Mistuning, Journal of Vibration Acoustics Stress and Reliability in Design, vol.106, issue.2, pp.204-210, 1984.
DOI : 10.1115/1.3269170

M. Imregun and D. J. Ewins, Aeroelastic vibration analysis of tuned and mistuned bladed systems, Proceedings of the Second Symposium on Unsteady Aerodynamics of Turbomachines and Propellers, 1984.

R. Rzadkowski, The General Model of Free Vibrations of Mistuned Bladed Discs, Part I: Theory, Journal of Sound and Vibration, vol.173, issue.3, pp.377-393, 1993.
DOI : 10.1006/jsvi.1994.1236

J. A. Kenyon, G. , and J. H. , Forced response of turbine engine bladed disks and sensitivity to harmonic mistuning, Proceedings of the ASME TURBO EXPO 2001, pp.2001-0274, 2001.

W. J. Jones and C. J. Cross, Reducing mistuned bladed disk forced response below tuned resonant amplitudes, Seventh National Turbine Engine High Cycle Fatigue Conference, 2002.

E. Capiez-lernout, C. Soize, J. Lombard, C. Dupont, and E. Seinturier, Blade Manufacturing Tolerances Definition for a Mistuned Industrial Bladed Disk, Journal of Engineering for Gas Turbines and Power, vol.127, issue.3, pp.621-628, 2005.
DOI : 10.1115/1.1850497

URL : https://hal.archives-ouvertes.fr/hal-00688121

Y. Han and M. Mignolet, Optimization of intentional mistuning patterns for the mitigation of the effects of random mistuning, Proceedings of the ASME TURBO EXPO 2008, pp.2008-51439, 2001.